The Saft charging is quite complex, but it is a constant current / constant voltage ending up at about 8 or 8.15v, with loads of other things taken into account. But its also based upon the power stored and assumed as being discharged. It will reset the power meter to 100 when it thinks its stored a bit over 100ah in the pack. The attached is the SAFT technical specification of the charge cycles.
Grumpy-b
berlingo help
Re: berlingo help
- Attachments
-
- SAFT_Stm5-100mre.ChargeMode.pdf
- (35.44 KiB) Downloaded 1166 times
Re: berlingo help
Hi Grumpy-b, that is very useful info, a lot to digest and is complex,
many thanks woofy
many thanks woofy
Re: berlingo help
If its a constant CC/CV charge.. If the Voltage cannot go higher than the lithium packs charged Voltage then they ought not to get overcharged. CC will save the charger from melting.
Then the rest will need to be spoofed. Say if the current drops enough, make the temperature sensor pins go "hi".
It's all easy saying it though.
Then the rest will need to be spoofed. Say if the current drops enough, make the temperature sensor pins go "hi".
It's all easy saying it though.
Re: berlingo help
You need to fully read and understand what the document says. Its not a simple CC / CV. If the Sagem controller follows what SAFT directed, which I have no doubt they did, then a considerable amount of parameters are programmed into the controller making it far from a simple spoofing of a few external items to get it to work as we require. Especially since it is supposed to measure and log the AH stored, and the SAFT Cells store 100ah, so if you use less you will substantially over charge them, if you have larger AH cells then you will never get them up to full storage .
Grumpy-b
Grumpy-b
Re: berlingo help
Hi Grumpy. I fully understand where you are coming from. Please re-read my previous post. It's not about using the original charger as it was designed. The idea is to spoof/bypass it.
No matter. It's not us getting stuck in.
As you know, EVTV has found an incredible AH (coloumb) counter. http://sendyne.com/Products/SFP100%20Cu ... odule.html
So if the voltage never exceeds what the pack requires, ever, then its not an issue even if it stays on.
Li's simply don't need balance charging. Unlike chemical cells.
No matter. It's not us getting stuck in.
As you know, EVTV has found an incredible AH (coloumb) counter. http://sendyne.com/Products/SFP100%20Cu ... odule.html
So if the voltage never exceeds what the pack requires, ever, then its not an issue even if it stays on.
Li's simply don't need balance charging. Unlike chemical cells.
Re: berlingo help
I read somewhere that the numbers on top of the terminal box on berlingo van designate the age and other info my numbers are-21645630-4 and 3yxsy40003669 and 96 340 652 80, can anyone please explain which is what?,
regards woofy
regards woofy
Re: berlingo help
No idea.
But the wheels have dates, the radiator has a date lable and so do many sections of the wiring loom. What reg is it. They seem to have been produced in batches. I have never seen a 2000 and earlier one with a side door, but a lot of the 2001 and later do have them. What terminal box are you refering to.
Grumpy-b
But the wheels have dates, the radiator has a date lable and so do many sections of the wiring loom. What reg is it. They seem to have been produced in batches. I have never seen a 2000 and earlier one with a side door, but a lot of the 2001 and later do have them. What terminal box are you refering to.
Grumpy-b
Re: berlingo help
hi, grumpy-b,the aluminium lid on the main cable imput connections, with the 2 screws to remove it! a plastic label with those numbers on,will check wheels etc tomorrow!
woofy
woofy
Re: berlingo help
Never seen a lable on any of mine or the ones Ive worked on. MAny controllers have been changed so its not something yopu could take as a definite.
Grumpy-b
Grumpy-b
-
- Posts: 870
- Joined: Tue Apr 01, 2008 5:27 pm
- Location: Galashiels, Scottish Borders
- Contact:
Re: berlingo help
A friendly Citroen dealer can tell you the age from the VIN, talk to the parts department, the info will be in their system.
Greg Fordyce
Daewoo Matiz
http://www.evalbum.com/4191
Daewoo Matiz
http://www.evalbum.com/4191
Return to “All things battery related”
Who is online
Users browsing this forum: No registered users and 19 guests