Dear members
I'm after an good CAD user to help me draw up a design for a battery terminal spring clip I want to get prototyped.
It will be like a very thin bulldog clip made out of sprung brass/nickel with a .125" male spade terminal on the end.
So I need some one with CAD, skype and or MSN who I can chat with to talk it through.
It will be for joining the tabs of A123 pouch type cells together in a non destructive way with the spade connection for a BMS connection point.
Baically I will clip the tabs together with the strong conductive spring clips face to face.
I'll try and free draw my idea later.
Any offers?
Thanks Peter
Help with a clip design wanted.
- retepsnikrep
- Posts: 1387
- Joined: Sat May 26, 2007 4:50 pm
- Location: North Yorkshire England
- Contact:
Help with a clip design wanted.
Regards Peter
Two MK1 Honda Insight's. One running 20ah A123 Lithium pack. One 8ah BetterBattery Nimh pack.
One HCH1 Civic Hybrid running 60ah A123 Lithium pack.
Two MK1 Honda Insight's. One running 20ah A123 Lithium pack. One 8ah BetterBattery Nimh pack.
One HCH1 Civic Hybrid running 60ah A123 Lithium pack.
- retepsnikrep
- Posts: 1387
- Joined: Sat May 26, 2007 4:50 pm
- Location: North Yorkshire England
- Contact:
Re: Help with a clip design wanted.
OK I have had a go with my feeble word skills trying to draw my idea.
Please see below.
Comments?
Please see below.
Comments?
Regards Peter
Two MK1 Honda Insight's. One running 20ah A123 Lithium pack. One 8ah BetterBattery Nimh pack.
One HCH1 Civic Hybrid running 60ah A123 Lithium pack.
Two MK1 Honda Insight's. One running 20ah A123 Lithium pack. One 8ah BetterBattery Nimh pack.
One HCH1 Civic Hybrid running 60ah A123 Lithium pack.
Return to “All things battery related”
Who is online
Users browsing this forum: No registered users and 2 guests