Just wondering if any of the homebrew EV guys have fitted any sort of aftermarket speedo?
I swapped the gearbox and now my speedo is way out. I've been using GPS but I'm looking for a more permanent solution and I've been considering a push bike speedo with a magnet located in the wheel rim. I also have an old Palm Pilot lying around and was thinking of this
Any ideas are welcome.
Also, does anyone know where I stand legally? My understanding is that: -
1. a working speedo is not required as for the MOT
2. not having a working speedo is illegal
3. a push bike speedo will keep me legal
Floydster
Speedo
- retepsnikrep
- Posts: 1387
- Joined: Sat May 26, 2007 4:50 pm
- Location: North Yorkshire England
- Contact:
Re: Speedo
floydster wrote:Also, does anyone know where I stand legally? My understanding is that: -
1. a working speedo is not required as for the MOT
2. not having a working speedo is illegal
3. a push bike speedo will keep me legal
Floydster
Correct in my view if we are talking about road use obviously, my EV's have used a calibrated bike speedo in the past.
Regards Peter
Two MK1 Honda Insight's. One running 20ah A123 Lithium pack. One 8ah BetterBattery Nimh pack.
One HCH1 Civic Hybrid running 60ah A123 Lithium pack.
Two MK1 Honda Insight's. One running 20ah A123 Lithium pack. One 8ah BetterBattery Nimh pack.
One HCH1 Civic Hybrid running 60ah A123 Lithium pack.
- aminorjourney
- Posts: 1084
- Joined: Thu Sep 14, 2006 5:24 am
- Location: Bristol
- Contact:
- geekygrilli
- Posts: 325
- Joined: Sun Jun 24, 2007 6:56 pm
- Location: London
- Contact:
Alot of kit car people use push bike speedos.
My brother did in his westfield, calibrated by following a 'proper' car, and then again when he borrowed someones GPS.
He didn't have to put it through an SVA (he re-built using teh same chassis, honest guv), but did get through lots of MOTs with no concerns.
Hope this is of help
My brother did in his westfield, calibrated by following a 'proper' car, and then again when he borrowed someones GPS.
He didn't have to put it through an SVA (he re-built using teh same chassis, honest guv), but did get through lots of MOTs with no concerns.
Hope this is of help
-
- Posts: 182
- Joined: Mon Jul 16, 2007 8:22 am
- Location: Lightwater Surrey
Speedo
Check out Speedy Cables, im sure they will be able to assist you. Tel: 01639 732299 http://www.speedycables.com
Last edited by electricvehicles on Thu Sep 06, 2007 12:41 pm, edited 1 time in total.
A bicycle speedo is a common solution, but they're not very big and can be hard to read.
There are a number of products like this about;
http://www.trailtechproducts.co.uk/store/erol.html
There are a number of products like this about;
http://www.trailtechproducts.co.uk/store/erol.html
Paul
http://www.compton.vispa.com/scirocco/
http://www.morini-mania.co.uk
http://www.compton.vispa.com/the_named
http://www.compton.vispa.com/scirocco/
http://www.morini-mania.co.uk
http://www.compton.vispa.com/the_named
- Peter Eggleston
- Posts: 162
- Joined: Tue Apr 10, 2007 9:12 pm
- Location: Tyne Valley Northumberland
magnet glue
I have had my magnet stuck to an alloy wheel rim with Araldite for 5 years without it ever coming unstuck and the bike speedo has served me well all that time.
Peter
Peter
- floydster
- Site Staff
- Posts: 433
- Joined: Tue Sep 19, 2006 9:36 pm
- Location: Central Scotland
- Contact:
Re: magnet glue
Peter Eggleston wrote:I have had my magnet stuck to an alloy wheel rim with Araldite for 5 years without it ever coming unstuck
Ta. Should be up and running pretty quickly now.
Floydster
I know I'm in my own world - it's OK, they know me here.
Who is online
Users browsing this forum: No registered users and 8 guests