At last I have got round to replacing the P bushes on my w reg van. I had a new set of the genuine Alluminium block heavy duty bushes rather than the simpler Steel ones.
What a surprise, this Van has allow bottom arms. Fit the same and take the same bushes, but a lot changed in shape of the forging from the steel variation. The profile out to the wheel / lower pivot is wider front to back. I guess this was a weight saving option, but I have not seen this on any of my other Blingos all of which are about the same age.
Grumpy-b
Berlingo front suspension
Re: Berlingo front suspension
I changed the P bushes on the S-reg project car (that you sold me) while the motor was out. I bought one set (steel) off the internet, which proved to have the wrong shaft diameter. I bought a second set from my local motor factors (cast) but they were wrong too.
Eventually I borrowed a reamer from work and reamed out the bush in the steel set to suit the wishbone.
Eventually I borrowed a reamer from work and reamed out the bush in the steel set to suit the wishbone.
Tim Crumpton
Re: Berlingo front suspension
The bushes are very seriously undersize by design with the shaft being 19mm and the bushes just over 18.5mm . As an interference fit they expand as they are driven on and hold position on the shaft while not being pushed up against a shoulder. They just need to be struck soundly to get them on. This is a common practice with this type of bush.
Some of the pressed steel arms with the replaceable ball joint have a larger pin size for the P bush.
The new ones make a major improvement to the handling.
Grumpy-b
Some of the pressed steel arms with the replaceable ball joint have a larger pin size for the P bush.
The new ones make a major improvement to the handling.
Grumpy-b
Re: Berlingo front suspension
So I shouldn't have reamed them out. Oops!
That's a big interference. I didn't think I'd ever get them on. Oh well; we shall see how long they last.
That's a big interference. I didn't think I'd ever get them on. Oh well; we shall see how long they last.
Tim Crumpton
Re: Berlingo front suspension
ITs quite a shock to see them and ever believe they will go on, its more of a stretch fit than an interference fit. We also did my sons 306 at the weekend and they are the same with the same clearances. So dont worry next time, just whack them!!! (But not too far as they are a pain if you driven them on too far)
Grumpy-b
Grumpy-b
Return to “Citroen Berlingo Electrique or other PSA vehicles”
Who is online
Users browsing this forum: No registered users and 20 guests