Page 1 of 1

Master Board Version 2

Posted: Thu Jun 24, 2010 5:58 am
by retepsnikrep

Re: Master Board Version 2

Posted: Fri Jul 16, 2010 11:05 pm
by GregsGarage
Peter,

Can you post a high res pic of the assembled master board? I want to check mine, I think I need to remove some caps.

EDIT: http://www.solarvan.co.uk/A123/A123Finished015.jpg Picture of Peter's master board.

Re: Master Board Version 2

Posted: Wed Oct 05, 2011 3:18 am
by isaac_alaska1
GregsGarage wrote:Got this PM from Issac.

isaac_alaska1 wrote:hey, i'm ordering up a bunch of components to build up a couple of master boards. the EEprom that's listed in the parts list i have is now obsolete, and i'm not positive what i should replace it with. the part number listed is AT24C512B-PU25. what constraints do i have to keep in mind when replacing it with something else? obviously the leg spacing and layout needs to be the same, and i would think that the memory size needs to be the same, and probably the speed and memory layout. is there anything else that i need to make sure matches up before i replace it?

-isaac


This would be more of Peter's area I think. Any thoughts Peter?

EDIT: Please post answers to the Master Board Version 2 topic.

Re: Master Board Version 2

Posted: Wed Oct 05, 2011 3:58 am
by retepsnikrep
I would think any equivalent part would do, i dont have any recommendations. With a few minor changes to the software it could be omitted and the pic eeprom used instead. We certainly have never fully utilised the eeprom in either the pic or the AT chip.

Re: Master Board Version 2

Posted: Wed Oct 05, 2011 11:41 pm
by isaac_alaska1
thanks! i just got a huge box from mouser, some of those chip tubes are almost 2 feet long :shock:

hope all is well with everyone, i've been away from the forum a lot lately with work.

Re: Master Board Version 2

Posted: Tue Dec 20, 2011 9:54 am
by retepsnikrep
If anyone running the BMS has any spare ATMEL AT24C512B eeprom chips then please let the forum know, as a group from Newcastle University is after one chip if some kind soul could oblige on here. I don't have any spares.

If anyone can reccomend a substitue great.

The device is still listed by ATMEL so an e-mail to them for a few if they have some left may well be worth it. Especially from the newcastle team members. ;)

http://www.atmel.com/dyn/products/devic ... e=left_nav

Re: Master Board Version 2

Posted: Sun Dec 25, 2011 1:59 am
by isaac_alaska1
peter, i can reccommend this one: 24LC512-E/P from mouser

http://www.mouser.com/ProductDetail/Mic ... FbSg%3d%3d

it's the one i got and it is working great as far as i can tell.