Hi,
New to the forum. I just picked up a Allied Peugeot Boxer from a salvage market that was sold by the local council. The van is 3 phase charge only according to the sheet from Allied
http://www.google.co.uk/url?sa=t&rct=j& ... X3_OLr-Fsw
The first problem I have is charging the main batteries as they are down to 30%. Looking at the main plug with in the engine bay of the van it has a 7 pin connector wile the standard 3 phase power supply I have has only a 5 pin connector.
Does anyone know what I would need to charge the van?
Thanks,
Fin
Allied Peugeot Boxer charging
Re: Allied Peugeot Boxer charging
Hello Fin
A couple of forum users have experience of the Allied vans. Hopefully one of them will be along soon to lend their experience.
In the mean time, can you post a picture of your 7 pin plug? Maybe that will help us to help you.
A couple of forum users have experience of the Allied vans. Hopefully one of them will be along soon to lend their experience.
In the mean time, can you post a picture of your 7 pin plug? Maybe that will help us to help you.
Tim Crumpton
Re: Allied Peugeot Boxer charging
My Company deal with allied vans.
Could you post a picture of the plug? I have never seen one with a 7 pin AC inlet.
Mike
Could you post a picture of the plug? I have never seen one with a 7 pin AC inlet.
Mike
Posts by Mike Schooling
Director and tech lead at indra.co.uk
Mazda RX8, Soliton Jr, 24KWH Sinopoly LiFePO4, Kostov 11alpha
http://www.diyelectriccar.com/forums/sh ... 61556.html
Director and tech lead at indra.co.uk
Mazda RX8, Soliton Jr, 24KWH Sinopoly LiFePO4, Kostov 11alpha
http://www.diyelectriccar.com/forums/sh ... 61556.html
Re: Allied Peugeot Boxer charging
Thanks for the replies.
See link for image on the plug that's on the van.
http://media.rs-online.com/t_large/F8937929-01.jpg
The plug has 6 poles and a earth when the 3 phase plug has 3 poles + earth and neutral. I have had a look in to this and spoken to a few electricians. As this van is ex council, its looking like the council have had this plug fitted to the van for extra safety. The centre pin looks like it a pilot pin, which I have been told is for safety as it stops arcing if the plug is pulled when power is being transferred.
Looking inside the plug I can see that it has Phase 1,2 and 3 which are black. The 4th pin has a blue cable indicating that it would be neutral . The 5th pin is empty and the 6 centre pin is the pilot which isn't needed as long as you have a switched power supply. It also has a earth.
I have now took the male plug off the vans extension cable and replaced it with a 3 phase standard 5 pin plug. As I now know what the cables are I have connected Phase 1,2 and 3 to the correct pins on the 3 phase plug. I have also connected the earth and neutral and insulated the pilot cable.
I am going to plug it in tomorrow and see if it charges. I will let you know how I get on.
See link for image on the plug that's on the van.
http://media.rs-online.com/t_large/F8937929-01.jpg
The plug has 6 poles and a earth when the 3 phase plug has 3 poles + earth and neutral. I have had a look in to this and spoken to a few electricians. As this van is ex council, its looking like the council have had this plug fitted to the van for extra safety. The centre pin looks like it a pilot pin, which I have been told is for safety as it stops arcing if the plug is pulled when power is being transferred.
Looking inside the plug I can see that it has Phase 1,2 and 3 which are black. The 4th pin has a blue cable indicating that it would be neutral . The 5th pin is empty and the 6 centre pin is the pilot which isn't needed as long as you have a switched power supply. It also has a earth.
I have now took the male plug off the vans extension cable and replaced it with a 3 phase standard 5 pin plug. As I now know what the cables are I have connected Phase 1,2 and 3 to the correct pins on the 3 phase plug. I have also connected the earth and neutral and insulated the pilot cable.
I am going to plug it in tomorrow and see if it charges. I will let you know how I get on.
Re: Allied Peugeot Boxer charging
Small update.
Plugged the van in to the 3 phase supply and everything seems ok with the plug. The front fan came on and the display on the dash showed (In charge). The problem is now its not pulling any current as the display shows 0A. Anyone have a ideas of what may be wrong. I am thinking that there may be a fault with 1 or more battery cells and the charger is refusing to charge.
Thanks,
Fin
Plugged the van in to the 3 phase supply and everything seems ok with the plug. The front fan came on and the display on the dash showed (In charge). The problem is now its not pulling any current as the display shows 0A. Anyone have a ideas of what may be wrong. I am thinking that there may be a fault with 1 or more battery cells and the charger is refusing to charge.
Thanks,
Fin
Re: Allied Peugeot Boxer charging
It needs plugging in to diagnostics to see what is going on.
Posts by Mike Schooling
Director and tech lead at indra.co.uk
Mazda RX8, Soliton Jr, 24KWH Sinopoly LiFePO4, Kostov 11alpha
http://www.diyelectriccar.com/forums/sh ... 61556.html
Director and tech lead at indra.co.uk
Mazda RX8, Soliton Jr, 24KWH Sinopoly LiFePO4, Kostov 11alpha
http://www.diyelectriccar.com/forums/sh ... 61556.html
Re: Allied Peugeot Boxer charging
Thanks Skooler, Just going to head down today and strip all the EV parts out the van to sell on.
Re: Allied Peugeot Boxer charging
I may be interested in purchasing some.
Would you consider selling the whole van rather than stripping it?
Would you consider selling the whole van rather than stripping it?
Posts by Mike Schooling
Director and tech lead at indra.co.uk
Mazda RX8, Soliton Jr, 24KWH Sinopoly LiFePO4, Kostov 11alpha
http://www.diyelectriccar.com/forums/sh ... 61556.html
Director and tech lead at indra.co.uk
Mazda RX8, Soliton Jr, 24KWH Sinopoly LiFePO4, Kostov 11alpha
http://www.diyelectriccar.com/forums/sh ... 61556.html
Re: Allied Peugeot Boxer charging
Sorry but its already stripped and full kit should be sold but will let you know if there is any problems.
Re: Allied Peugeot Boxer charging
I'm a bit late now that the van is stripped, but I will add this for completeness and future reference.
I just found this on Martin Winlow's shop site:
http://evbitz.uk/EVBitz.uk/T2___CEE.html#id10
Maybe this explains the unusual plug.
I just found this on Martin Winlow's shop site:
http://evbitz.uk/EVBitz.uk/T2___CEE.html#id10
My understanding is that only some of these conversions have both single phase charging AND three phase charging...
Maybe this explains the unusual plug.
Tim Crumpton
Return to “Cars,Vans and other road vehicles”
Who is online
Users browsing this forum: No registered users and 8 guests