Search found 89 matches
- Tue Dec 29, 2009 3:46 pm
- Forum: BMS thread
- Topic: Old BMS Hardware Thread
- Replies: 613
- Views: 1033412
Peter, Yes, I got the display working fine. Your calcs for IR seem correct to me also. I have the basics of the system working now. That is the slave boards are working well with the master (V1.0) and I have adjusted the code to work with a LEM current sensor. I am currently working on getting the w...
- Mon Dec 28, 2009 4:22 pm
- Forum: BMS thread
- Topic: Old BMS Hardware Thread
- Replies: 613
- Views: 1033412
Peter, I think logging the cell data is a great idea. I have seen another system that does this and the most interesting thing I have found is how each cell compares to the others at the same moment in time. Under hard accelerations you could quickly see the voltage difference between your best and ...
- Mon Dec 21, 2009 8:15 pm
- Forum: BMS thread
- Topic: Old BMS Hardware Thread
- Replies: 613
- Views: 1033412
Peter, I am going to drive the transmitter using the version 1.0 master board (I haven't had time to assemble the V2.0 yet). I remember you connected it via the drive inhibit connecctor. I assume you simply supplied 5 volts to pin1 of the J6 connector and pin 2 was connected to the data in pin on th...
- Mon Dec 21, 2009 4:52 pm
- Forum: BMS thread
- Topic: Old BMS Hardware Thread
- Replies: 613
- Views: 1033412
Peter, I am starting to work on the remote data system. I saw a picture you previously posted of the transmitter http://www.solarvan.co.uk/bms/RemoteDisplay002.jpg It shows a resistor and a capacitor but I have not been able to find any reference schmatic for the transmitter. Did I miss it somewhere...
- Mon Dec 14, 2009 11:05 pm
- Forum: BMS thread
- Topic: Old BMS Hardware Thread
- Replies: 613
- Views: 1033412
- Sat Dec 12, 2009 4:38 pm
- Forum: BMS thread
- Topic: Old BMS Hardware Thread
- Replies: 613
- Views: 1033412
Peter, I am using your slave software. My initial problem with running your software for the slaves had to do with the setting of the configuration bits that you do in the begining of the software. I typically set my configuration bits using a config window during compiling. The code you wrote for t...
- Sat Dec 12, 2009 5:24 am
- Forum: BMS thread
- Topic: Old BMS Hardware Thread
- Replies: 613
- Views: 1033412
- Wed Dec 02, 2009 4:16 am
- Forum: BMS thread
- Topic: Old BMS Hardware Thread
- Replies: 613
- Views: 1033412
- Tue Dec 01, 2009 1:41 am
- Forum: BMS thread
- Topic: Old BMS Software Thread
- Replies: 600
- Views: 1007673
- Thu Nov 26, 2009 4:59 am
- Forum: BMS thread
- Topic: Old BMS Software Thread
- Replies: 600
- Views: 1007673
I wanted to provide some background on the code that I wrote for using a standard PIC on the slave portion. I have some of Peter's slave boards and one of his master boards. I was able to get this configuration working just fine using the original picaxe chips on both boards. What I wanted to do was...