Page 1 of 1

Getting Lexia / PP2000 to talk to Berlingo Electrique

Posted: Thu Oct 22, 2015 10:41 pm
by willfromsussex
I have a PSA interface and Lexia / Peugeot Planet software which I sometimes use to talk to my Peugeot 206. Tried connecting to the Electrique but the only thing it seems to read is the Webasto heater!

A helpful chap suggested I tell it it is a Peugeot E-Partner instead, however it asked for VIN and wouldn't procede without one, any one got any advice?

Will

Re: Getting Lexia / PP2000 to talk to Berlingo Electrique

Posted: Mon Jan 25, 2016 9:21 pm
by willfromsussex
Bump. Is it usually possible , if so what settings, thanks.

Re: Getting Lexia / PP2000 to talk to Berlingo Electrique

Posted: Wed Jan 27, 2016 8:25 pm
by Flying John
We had the Actia version of the tool and we used to use the Partner option, then enter the middle 4 digits of the type number printed on a label in the drivers door shut. From memory it was 9422. Then you were asked to switch ignition on and the tool tried to communicate with the van. After that you could scroll through the menu options until you got to fuel type and there was an Electric option.

After selecting electric there were a number of options to help you test and diagnose faults as well as doing maint charges etc.

John

Re: Getting Lexia / PP2000 to talk to Berlingo Electrique

Posted: Sat Jan 30, 2016 12:02 am
by willfromsussex
THANKYOU!

I will give that a go.