blingo brake servo pump etc...?

If you own a Electrique or any of the other PSA range of vehicles then look here for your answers and post your questions or general views here
Grumpy-b
Posts: 991
Joined: Sat Dec 01, 2007 12:06 pm

Re: blingo brake servo pump etc...?

Postby Grumpy-b » Sat Mar 08, 2014 5:41 pm

It only takes one or two cells to be duff to make the difference, but the voltages are not giving you the real picture they need to be taken just after the Eco light has come on, or after you have limped home. That will give a much better understanding of whats going on with the cells at their worst. The cells can appear to recover quite quickly so do this as quickly as possible after you come to rest.

Grumpy-b

berlingoian
Posts: 53
Joined: Mon Mar 03, 2014 12:00 am

Re: blingo brake servo pump etc...?

Postby berlingoian » Sat Mar 15, 2014 3:55 pm

Well......
I've been round the block again, didnt take long to make eco lite go on.
Took readings immediately and were identical to previous ones I posted :-(

Grumpy-b
Posts: 991
Joined: Sat Dec 01, 2007 12:06 pm

Re: blingo brake servo pump etc...?

Postby Grumpy-b » Sat Mar 15, 2014 4:58 pm

The only way forward is to remove the packs and test the cells under load. A good days work ahead. DIsconnect the handbrake cables in the car, you take off the plastic cover and undo the single 13mm nut then slide the cables out, much easier than being tempted to take the drums off.

Grumpy-b


Return to “Citroen Berlingo Electrique or other PSA vehicles”

Who is online

Users browsing this forum: No registered users and 26 guests