Tractor from scrap yard finds.

Have you an battery powered lawn mower or kiddy car or anything that is not designed for the road, be it home made or bought, then this is a area for you
User avatar
Night Train
Posts: 350
Joined: Sat Jun 21, 2008 11:55 pm
Location: Manchester

Tractor from scrap yard finds.

Postby Night Train » Tue May 04, 2010 11:56 pm

I was gifted one of these.
Image

Made one of these to match.
Image

Added one of these.
Image

Mock up.
Image

Remade one of these.
Image

Got these gifted from an EV friend in the States.
Image

Turned these...
Image

Into these.
Image

Made one of these
Image

To fit like this.
Image

And like this.
Image

To give this.
Image

Then found these.
Image

And made these.
Image

And these.
Image

And we have this.
Image
Image
Image

Had to do this.
Image
Image

So that this could happen.
Image

And this.
Image

A quick chassis upgrade.
Image

Made these.
Image
Image

To get this.
Image

And then made this.
Image

Got one of these.
Image
Image

And was gifted four of these.
Image

Made some more of this.
Image

Pulls little wheelies with 12v!
Image

Proper test.
Image

It moves so it needs these.
Image

Made this.
Image

For here.
Image

Then this bit.
Image

Because straight roads are boring.
Image
Image

As are flat ones.
Image

Looks a little like this now.
Image

But Optimas live like this.
Image

Can you manage 12"? Nah, but the MR2 can!
Image

Just added a seat mounting.
Image

This whole project has been made from gifts, dirt cheap Ebay finds and raiding the scrap metal yard on the way to work.

Many thanks to Steve, Simon and Jim for their gifts, support and advice.

To be continued.....

User avatar
geekygrilli
Posts: 325
Joined: Sun Jun 24, 2007 6:56 pm
Location: London
Contact:

Re: Tractor from scrap yard finds.

Postby geekygrilli » Wed May 05, 2010 8:48 am

Brilliant!

Good project - and a great write up!

Any vids of you driving?
_______________________________________
Fiat Cinquecento EV
http://www.evalbum.com/1099
Little Chitty Chitty Bang Bang replica
http://www.evalbum.com/3030
EVT 4000e Electic 'Vespa'

User avatar
Night Train
Posts: 350
Joined: Sat Jun 21, 2008 11:55 pm
Location: Manchester

Re: Tractor from scrap yard finds.

Postby Night Train » Wed May 05, 2010 11:17 am

Thank you, the write up is rubbish really, no real information. However, if a picture is worth a thousand words.....:D

There is a full write up here. http://www.diyelectriccar.com/forums/showthread.php/woodys-tractor-project-39910.html

I've not driven it yet, no seat (that one is temporary) or controls fitted. And it is on a basement workshop so no space to go anywhere until it is rebuilt outside. Then I will try and get soemone to video it.

I am planning on using a fiddle brake system on it. Right foot throttle and service brakes, left foot steering brakes. I have to get the seat sorted before I can work out the ergonomics of the controls. I might continue to use the slider pot (in the vid) for a throttle (why is it still called a throttle? It might as well be a 'gas' pedal for all the relevence!) as it works and is there.

The plan is to make it work and clothe it in a wooden body and seat to show off my cabinet making skills.

User avatar
ChrisB
Posts: 4657
Joined: Fri Jul 14, 2006 11:33 am
Location: Hampshire on the Southcoast
Contact:

Re: Tractor from scrap yard finds.

Postby ChrisB » Wed May 05, 2010 3:51 pm

That really is one class bit of kit 8)

Some lovely metal work there, and an cool use of a Club Car motor as well 8)

Cant wait for the finished project.

ChrisB
I reject reality and substitute my own !!!!!!

User avatar
Night Train
Posts: 350
Joined: Sat Jun 21, 2008 11:55 pm
Location: Manchester

Re: Tractor from scrap yard finds.

Postby Night Train » Wed May 05, 2010 4:30 pm

Cheers Chris.

I was thinking of mounting the controller upside down under the seat.
Do you think cooling will be an issue?
Image

User avatar
ChrisB
Posts: 4657
Joined: Fri Jul 14, 2006 11:33 am
Location: Hampshire on the Southcoast
Contact:

Re: Tractor from scrap yard finds.

Postby ChrisB » Wed May 05, 2010 10:04 pm

Really depends how hard you expect to work it ??

My fiesta controller had no cooling what so ever and was mounted inside the car, which was fine around my area as its very flat, but Alan who bought the vehicle from me found he had to mount it under the bonnet on a large lump of allly as its quite hilly around him and had too work it quite hard.

ChrisB
I reject reality and substitute my own !!!!!!

User avatar
Night Train
Posts: 350
Joined: Sat Jun 21, 2008 11:55 pm
Location: Manchester

Re: Tractor from scrap yard finds.

Postby Night Train » Thu May 06, 2010 12:51 am

How hard it works depends on how much fun I want to have pulling trees and ploughing snow! :lol:

I have no lawn to mow and no garden big enough to use it on. As one of the Yanks said on the other site, I am crazy enough to build a yard tractor from scratch and not have a yard! :lol:

I suppose it could be the luxury of a seat heater for next winter's snow ploughing. :wink:

User avatar
ChrisB
Posts: 4657
Joined: Fri Jul 14, 2006 11:33 am
Location: Hampshire on the Southcoast
Contact:

Re: Tractor from scrap yard finds.

Postby ChrisB » Fri May 07, 2010 7:53 pm

Give it a go and see what happens, curtis units are pretty bomb proof when it comes to temps and will generally shut themselves down if they start to warm up.

ChrisB
I reject reality and substitute my own !!!!!!

User avatar
Night Train
Posts: 350
Joined: Sat Jun 21, 2008 11:55 pm
Location: Manchester

Re: Tractor from scrap yard finds.

Postby Night Train » Sat May 08, 2010 11:02 pm

That's good to know. :D

I am going to mount the reversing contactors under the seat too, just ahead of the controller. That should keep all the cables nice and short.
Means I can use up cable scraps and save cutting into the longer lengths I have. :wink:

User avatar
Night Train
Posts: 350
Joined: Sat Jun 21, 2008 11:55 pm
Location: Manchester

Re: Tractor from scrap yard finds.

Postby Night Train » Sun Jul 18, 2010 10:26 pm

It seems like ages since I did any work on the tractor but after picking up a cast iron bath from Ebay and then doing some more building work on my house I decided it was time to get back to some real fun!

I faffed about with the controller for a while and then decided to move it from under the seat. I figured I wanted to have a gear shift and a parking brake and that would start taking up space under the seat to fit the linkages in place.

So the controller got a new home at the back of the steering box.
Having got it there I decided to start placing some of the high current cables. I removed the batteries for safety.
I figured that I should put the reversing contactor near the motor to reduce the number of cables being run so that now lives under the seat.

This is where the controller is.
Image

Only two 35sqmm cables will run to the motor.
Image

Those who know Curtis controllers will notice that one of the cables was in the wrong place so I moved it.
Image

Here is the motor and reversing contactor.
Image
Image

Doing all that wiring meant I got to play with my cheap hydraulic crimper.
Image

This is the result.
Image
Those with a keen eye can see what is wrong with this picture. :x

I am using 35sqmm cable with 35-8 crimps.
The 35sqmm dies are only able to form a nice hexagon on the crimp it is so loose that the cable just slides out of it. It was so loose I was able to push the strands back in too.

I switched to using a 25sqmm die and crimped twice. First press was with the crimp turned 60deg and pressed about 90%. I then turned the crimp one flat and pressed it again fully.
I had to turn the crimp as the first one was left with large flat bits of flash where a bit of the crimp was squeezed out of the hex and between the flat parts of the die.

It is a pain to have to do this but it works.

I may try adding a dome head steel rivet inside the 35sqmm die so that it puts a dimple on one of the flats and see if that will work better.


Return to “Non road going EV's”

Who is online

Users browsing this forum: No registered users and 11 guests