Battery Vehicle Society

Hello

Anyone have a part number or info on the little hose connector used when watering.

Need to get one

Thanks

Joe

Yep you can change the input charge rate to 14A which is the french standard I'm led to believe, as we only have 13A outputs, it does reduce the charge time a little in 14A mode but not a great deal. Needs to be done with the a main dealer box though. Not sure what other paramenters can be changed ...

I notice on the charge flap of my Berlingo it has a sticker stating 14amps maximum, its a bit grubby so hard to make out. I have heard that there is a setting in the ECU to change the charge rate. Is there any official documentation regarding the current draw and settings etc anywhere. Thanks Joe

I saw this, there website makes for interesting reading but a real mixture of products

http://sites.google.com/site/evoasisorg ... an-upstart

The above pic shows charging post that already installed in London, so not sure what they are offering.

Well I went for a universal stretch CV Gaiter as listed below http://cgi.ebay.co.uk/UNIVERSAL-STRETCH-CV-JOINT-BOOT-FITTING-CONE-KIT-NEW_W0QQitemZ180333648433QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item180333648433&_trksid=p3911.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12...

Ok heres a link to the two choices of lower arm http://cgi.ebay.co.uk/WISHBONE-ARM-Citroen-Berlingo-Multispace-2-0-HDI-98-LH_W0QQitemZ350173397400QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item350173397400&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A15%7C39%3A1%7C240%3A1318 A...

I have so far tried the comapnies below details taken from the reg of the van and coming up as an Electrique model on their computer. GSF. Lower Arm £54 Driveshaft £90 (not conviced its right) Camberly Auto factors. Lower Arm £44 no listing for driveshaft :cry: Local Citroen dealer. Front L...

I notice I have a small hole in the O/S CV Gaiter. Are the parts avalable to replace the CV gaiter, I got the shaft off, but it looks like you either need a slide tool to get the gaiter over the CV joint, or strip down the inner joint by removing the peened over knuckle cup. Or can you get an exchan...

Yep I have used Rolling roads a lot, can be quite expensive. Might be worth mentioning that you will give them some publicity re this forum and angle for some support for your research etc. Going by my own data and the variances I discovered your results will have to be quite focused, I clocked a 5 ...

My observation is the anything over max green on eco-meter seems to waste energy. Has anyone got any real data on input/output power, etc. For example a) the most efficient hill climb load (on eco-meter) b) the best cruising load (on eco-meter) If not, I am thinking of putting my Berlingo on a roll...